More..
 

 
 
Accreditations
 
 


Product Range
Component Index
Standard Details
Finishes
Installation Guide

 
 
Portfolio List and Detail
 
 
FAQ
Map and Directions
Website Map
Contact

 
   
  H.Power
Allen & Overy
Proctor & Gamble
Tetra Pak
Ford
CAI
IBM
French Embassy
7- Eleven
MBK
Golden Land
New Zealand Embassy
Krungthai AXA
J.Walter Thompson
Unilever
Ozcon Interior   More...
 
 


Partitioning Systems consists of three main suites, plus an add-on series of components and accessories that enhance the suites:

 1.series - 40mm thick elegant glazed  partitioning system.
 2.series - 80mm thick slimline drywall  partitioning system
 3.series - 100mm thick performance  partitioning system

-  Elegance & Sophistication

The elegant slimline appearance of the series has made it one of our most popular Executive Office suites.

is a framed glazed partitioning system that provides physical division without visual separation. It is a 40mm suite with a slim aluminium framed construction that is available in a natural anodised finish or in powder coat colour finishes.

Its open space design is optimally suited for perimeter Executive Offices and in office environments where natural lighting is important.

-  Strength & Economy

is the region's best selling Office Partitioning System, incorporating the aesthetic qualities of a slim drywall partitioning. The series is 80mm thick and provides a flexible combination of glass panels and a 51mm steel stud-plasterboard construction.

The uncomplicated and flexible design of the series makes it the perfect choice for an attractive yet practical office environment.

-  Bold & Strong

The is noted for its exceptional performance and strength. The series is a 100mm thick partitioning system that uses a 64mm stud-plasterboard construction, and is renowned for its bold and strong appearance.

Like the system, the system has been engineered to accommodate 35mm or 45mm thick, full height 2.8 metre doors.

The overall performance attributes of this system has made it an established specification product amongst many designers and specifiers alike.

The Add-on suite is one of our newest innovations and has proven to be immensely popular sine its launch. is a range of clip-on profiles that can completely change the appearance of a Partitioning Systems simply by screwing it onto the vertical face of the systems.

ALLOY Split Batten System

The Split Batten system is a quick and easy construction system for fitting panels (timber, fabric) onto walls.

The split batten system comes in two sizes, depending on the size of the panel being hung. The Upward Hook is lined and screwed onto the wall, while the Downward Hook is carefully screwed to the back of the panel. The panels are hung once during construction for alignment purposes, then removed and stored until the project is close to completion. It is then re-installed as part of the final finishing touches of a project.

This simple but effective system ensures that expensive veneer and fabric panels are not damaged during construction. The system is strongly recommended for projects requiring very high quality finishes.

ALLOY Wire Management Systems

The ALLOY Wire Management System is a 100mm high double compartment channel with a removable cover plate and matching screw-on skirting. The compartments are designed to carry electrical and communications wiring that normally would be wired inside partition walls.

Running the cabling and wiring within the Wire Management compartment ensures easy access to the cabling during or after the completion of an office interior construction.

ALLOY Accessories

The ALLOY accessories range that complement our Partitioning Systems include:


 

1. Glazing rubber beads that are available for 6mm and 10mm glass panels. The glazing rubber beads are designed specifically for our glazing system and are available in black, grey and white.


 

2. Skirting rubber is used for our screw-on skirting sections, and is available in black and grey.



 

3. Schlegel Door Trim - used to seal doors. Available in grey.



 

4. Rubber Door Seal - an alternative and preferred method to the Schlegel Door Trim, this seal is available in black and grey.


 

5. Easy-Fit Aluminium Door hinge - available in a natural anodised finish, our door hinges have been specifically manufactured for our Aluminium Systems. The screws on the door hinge align perfectly with the screw flutes of our suites to ensure strength in accepting the weight of heavy doors.

 

6. Aluminium Skirting Ends - Bags of skirting corners and ends are available for the screw-on skirting system.


 

7. Doors - Highest quality, UV lacquered or coloured doors are available in non-standard heights.


 

8. Fabric - imported commercial fabric range available upon request.

 


Copyright © 2003, Alloy Partitioning Systems Ltd.
See our Terms of Use and Privacy Policy. Phone +66 2 683 1702-5 Fax +66 2 284 1328